Canon PIXMA MP620 Series Getting Started page 43

4
D e te c t Acc es s P oint
When the Access Points screen appears, select an access point to use, then click Connect.
When an access point is detected automatically, the Access Points screen does not appear. Go to step
• To connect to the access point with WEP or WPA displayed in the Encryption column, enter the network key (WEP key or WPA key) in Network Password,
then click Connect. For details on network keys, refer to "3.1 About Network Key (Windows)/Network Password (Macintosh)" in the printed manual: Network
Setup Troubleshooting.
• If you want to select an access point manually, or if the target access point is not displayed in the list, or if an error message appears, refer to "5 The
following screen is displayed during setup" in the printed manual: Network Setup Troubleshooting.
You can retrieve your network key by using the Canon PIXMA
Wireless Setup Assistant or the instructions which can be
downloaded from the Canon support webpage (www.usa.canon.
com/downloadlibrary).
If you are unable to retrieve the network key or other settings
refer to the manual of your access point or router, or contact its
manufacturer.
Macintosh
.
F