Canon PIXMA MP620 Series Getting Started page 45

8
On the Connection Performance
Measurement dialog box, click
Next.
Measuring of the communication status
starts, and the results are displayed.
• Measuring takes a few minutes.
Measuring can be cancelled
by clicking Cancel. You also
examine the detailed status of the
communication link after setup by
using the Canon IJ Network Tool.
9
Confirm the measurement results, then click
Finish.
Ensure that is displayed in Connection
performance between the printer and the access
point.
The Printer Setup Utility and Canon IJ Network
Scanner Selector will start up.
• If any symbol other than is displayed, refer to displayed comments
and Help for improving the status of communication link.
• To check whether the new location is better, click Remeasurement.
Measurement of the communication status is performed again.
• When any message on Overall network performance appears in the
measurement results, rearrange the printer and other network devices
following the instructions on the screen.
Next, read "18 Add the Machine" on page 45!
Mac OS X v.10.5.x
Mac OS X v.10.4.x/v.10.3.9
Macintosh
Go to Step .
Go to Step .

F