Displaying The Status Screens - Canon XF300 Instruction Manual

Displaying the Status Screens

Displaying the Status Screens
You can use the status screens to check the camcorder's various recording- and playback-related settings. You
can also output the status screens on an external monitor.
Operating modes:
1 Press the STATUS button.
• The status screen most recently displayed will appear unless you
turned off the camcorder or changed the operating mode. In such
case, the [Camera] status screen appears in
[Buttons / Remote] status screen appears in
2 Push the joystick up/down or use the SELECT dial to scroll through
the status screens.
3 When you are finished, press the STATUS button again to exit the
status screens.
• Alternatively, you can press the MENU or CUSTOM PICT. button. Doing
so will exit the status screen and open the respective menu.
Status screen
[Camera]
[Buttons / Remote]
[Audio]*
[Media]
[Video]
[User Memo]
[Battery / Hour Meter]
[X Data 1/3]
[X Data 2/3]
[X Data 3/3]
* Does not appear in the [Photos] index screen.
Description
Displays settings related to recording, such as gain, focus and zoom.
Allows you to verify the current function of each assignable button
and whether the wireless controller is on.
Displays settings related to audio.
Displays information about the recording media.
Displays the settings for the video terminals and which special
recording mode is in effect.
Displays the user memo that will be recorded with clips.
Allows you to check the remaining battery time, battery life and how
long the camcorder has been in operation.
Displays the settings for the custom picture file that will be
embedded into clips.
Additional Information
mode and the
mode.
8
0
N
– 180
N N
180
N N
181
N N
181
N N
182
N
– 182
N N
183
183
N
– 184
184
179