Displaying The Status Screens - Canon XF100 Instruction Manual

Displaying the Status Screens

You can use the status screens to check the camcorder's various recording- and playback-related settings. You
can also output the status screens on an external monitor.
Operating modes:
1 Set an assignable button to [Status] (0 95).
2 Press the assignable button.
• The status screen most recently displayed will appear unless you turned off the camcorder or changed the
operating mode. In such case, the [Camera] status screen appears in
Remote] status screen appears in
3 Push the joystick up/down to scroll through the status screens.
4 When you are finished, press the assignable button again to exit the status screens.
• Alternatively, you can press the MENU or CANCEL button. Pressing the MENU button will exit the status
screen and open the menu.
Status screen
[Camera]
[Buttons/Remote]
[Audio]*
[Media]
[Video]
[User Memo]
[Battery/Hour Meter]
[X Data 1/3]
[X Data 2/3]
[X Data 3/3]
* Does not appear in the [Photos] index screen.
mode.
Description
Displays settings related to recording, such as gain, focus and
zoom.
Allows you to verify the current function of each assignable button
and whether the wireless controller is on.
Displays settings related to audio.
Displays information about the recording media.
Displays the settings for the video terminals and which special
recording mode is in effect.
Displays the user memo that will be recorded with clips.
Allows you to check the remaining battery time, battery life and
how long the camcorder has been in operation.
Displays the settings for the custom picture file that will be
embedded into clips.
Displaying the Status Screens
mode and the [Buttons /
0
N
– 154
N N
154
N N
155
N N
155
N N
156
N
– 156
N N
157
157
N
– 158
158
153