Table of Contents
Advertisement
6.4. V LINIALITY ADJUSTMENT / CONFIRMATION (4:3 MODE)
6.4.1. 100i V-Linear ADJUSTMENT
1. Receive PAL monoscope pattern.
2. Set scan mode to 100 Hz by remote control key.
3. Confirm V-linear (100i / 4:3) as to the balance of circle. / If needed,
adjust V-linear (100i / 4:3).
6.4.2. 120i V-Linear ADJUSTMENT
1. Receive NTSC monoscope pattern.
2. Set scan mode to 100 Hz by remote control key.
3. Confirm V-linear (120i / 4:3) as to the balance of circle. / If needed,
adjust V-linear (120i / 4:3).
6.4.3. 50p V-Linear ADJUSTMENT
1. Receive PAL monoscope pattern.
2. Set scan mode to progressive by remote control key.
3. Confirm V-linear (50p / 4:3) as to the balance of circle. / If needed,
adjust V-linear (50p / 4:3).
6.4.4. 60p V-Linear ADJUSTMENT
1. Receive NTSC monoscope pattern.
2. Set scan mode to progressive by remote control key.
3. Confirm V-linear (60p / 4:3) as to the balance of circle. / If needed,
adjust V-linear (60p / 4:3).
29
Advertisement
Table of Contents
