Table of Contents
Advertisement
adjusment before adjusting anything.
8. Wedge A shown in Fig. 1 should be fixed within a range of 45° to the
left of the vertical line as shown.
9. After inserting wedge A, insert wedges B, C and D. / The wedges
should be set 90° apart from each other.
10. Be certain that the four wedges are firmly fixed and the deflection
yoke is tightly clamped in place otherwise the deflection yoke may shift
its position and cause a loss of convergence and purity.
5.10. WHITE BALANCE
Item / preparation
1. Select Service Mode 1.
2. Aging should have been performed over 30 minutes.
3. Receive the white balance pattern.
4. Picture menu: DYNAMIC NORMAL.
AI: OFF
21
Advertisement
Table of Contents
