Table of Contents
Advertisement
B. YHC, YV, XV, Adjustment (Fig. 2)
a. Adjust so that Static and Dynamic convergence is best with YHC,
VR, YV and XV coil. / In case of static convergence is tilted, repeat
(1) Static convergence Adjustment.
C. Dynamic convergence Adjustment
a. When dynamic convergence is bad, fixing permalloy between neck
and DY so that dynamic convergence is best.
4. Confirm that left upper side line is straight. / When left upper side line
isn't straight, put magnet on DY and adjust the left upper side line to
straight.
5.9. CUT OFF
Preparation
1. Receive a colour bar signal with colour "OFF" and operate the TV set
more than 15 minutes.
2. Set the picture menu to "DYNAMIC NORMAL" and the AI to off.
3. Connect an oscilloscope to TPL7 with DC mode.
4. Set the TV set to Service Mode 1.
5. Screen VR: Min.
19
Advertisement
Table of Contents
