Advertisement
Item
Communication
error display /
15.7. CR16 Mechanism Ageing Mode
To perform the ageing mode:
1. Enter into Test mode.
2. Press [3] button on remote control. It enters into ageing mode.
(see below for ageing process)
Ageing process:
1. Tray 1 open.
2. It waits for one second (Note: Do not put any disc into the tray.
3. Tray close.
4. TOC READ (Reading incomplete)
5. Tray 2 open & repeat step 1 to step 4. (Process repeat until Tray 5)
6. Tray check.
7. Whole process complete (Counter on FL increase by 1)
Note: To exit ageing mode, press [POWER] button. The unit will power down. Do not unplug the
power cord until FL display shows "GOODBYE". This is to avoid tray jam problem.
15.8. Operation Lock Function
15.8.1. Setting
- Operation Lock Function
1. With the DVD/CD/
PDF created with pdfFactory Pro trial version
Operational
Condition and
Key Function
While the player
Displays frequency of
is stopped and no
communication errors
disc is inserted,
between system computer
press and hold
firm IC and mechanical
computer IC during DVD
down the
module.
button on the
player and the
MENU button on
the remote
controller unit.
Press "FL
Display" button
for next page
and POWER ON, and then press the
www.pdffactory.com
Details
ECC_ _ _ 00
30
Display
TO
Press
STOP
Open
on the
Advertisement
