Advertisement
Error Code
F103
IIC Error
F4FF
F880
F890
F891
F893
F894
F895
F897
F8A0
15.6. Mode Table 2
Following modes are available with combinations of the pressed buttons on the player and on
the remote controller unit.
Item
Jitter display
PDF created with pdfFactory Pro trial version
Meaning
IIlegal highlight position
Forced initialization failure (Time out)
Unsuitable task number
A message is sent during AV task
transmission
Unable to transmit a message to AV task
DVD Module problem
EEPROM failure
Firmware compatibility problem
Initialization is not done properly
Unsuitable message command
Operational
Condition and
Key Function
While the player
is stopped and no
disc is inserted,
press and hold
down the
button on the
player and the
number button,
"5" on the remote
controller unit.
Disc standard is possibly illegal when highlight
is displayed.
When a message arrives from not existing
During transmission of a message to AV
When transmission of a message to AV
starts
Check for firmware version
Check for firm version for Main & DVD Module
P.C.B.
Follow proper steps for initialization & reset
When transmission of a message to AV
starts
Details
Jitter display / Measures
and displays jitter.
Measurement is repeated
every second. Read error
counter starts at 0 at the
mode setting, and increased
by one as data read fails at
target block. A small defect
is allowed to correct by
retry. Any possibility is
counted as one increment.
Repetitive errors after retry
increase by two levels or
more.
24
www.pdffactory.com
Details
Display
J
xxx/yyy zz (display1/
*1
display2) / /
: Jitter
*1
display mode /
: Jitter
*2
measurement value /
*3
Read error counter
:
/ *4
Focus driving value
Values are shown to one
decimal place in the
decimal digit. Focus
driving value is displayed
in the hexadecimal digit.
TO
Press
STOP
on the
:
Advertisement
