Advertisement
value.
Bias voltage for Deck 2
19.1.4. Bias Frequency Adjustment (Deck 1/2)
1. Set the unit to "AUX" position.
2. Insert the Normal blank tape (QZZCRA) into DECK 2 and set the
unit to "REC" mode (
3. Adjust L1002 so that the output frequency is within the standard
value.
Standard Value: 89 ~
110 kHz
19.2. Tuner Section
19.2.1. AM-IF Alignment
1. Connect the instrument as shown in Fig. 5.
2. Set the unit to AM mode.
3. Apply signal as shown in Fig. 5 from AM-SG.
PDF created with pdfFactory Pro trial version
14±4mV (Normal)
Fig. 2
Fig. 3
use "REC/STOP" key).
Fig. 4
101
www.pdffactory.com
Advertisement
