Section 4
Removal of the Gearmotor
NOTE: The gearmotor does not have to be removed for
cleaning/sanitizing.
n
Electric Shock Hazard
Unplug unit before servicing or cleaning.
1. Remove the front panel from dispenser. (See "Removing
the Front Panel").
Gearmotor
Wire
2. Unplug the gearmotor wire.
3. Turn the two removal pins toward you.
Part Number 000007646 Rev 02 5/20
Warning
Remove Pins
4. Pull removal pins out to the right.
5. Grasp the gearmotor as the second pin is removed. Pivot
the gearmotor out of place.
Maintenance
21