Component Parts – Removal & Replacement
Unplug unit before servicing or cleaning.
Electric Shock Hazard.
1
Remove the front panel from dispenser. (See
pages 4-1 and 4-2.)
2
Remove paddle wheel pin, agitator, and paddle
wheel. (See pages 4-5 and 4-6.)
3
Unplug the gearmotor wire.
4
5-
Removal of the Gearmotor
WARNING
Gearmotor
wire
Removal
pins
4
Turn the two removal pins toward you as shown
in photo.
5
Pull removal pins out to the right.
Section 5