Table of Contents
Advertisement
You can do your configuration of
program and options and memorise in
the appliance memory.
To memorise your
configuration:
1. Press the on/off button to activate the
appliance
2. Set the program and available
options.
3. Press the (F) button for some
seconds.
The sound and the message on the
display confirm that the configuration is
memorised.
To activate your memorised
configuration:
1. Press the on/off button to activate the
appliance.
2. Use the program knob to set
Favourite
position.
Previously memorised configuration of
program and options will be restore.
9.3 Adjustment of the remaining
moisture
The appliance allows you to chose
between 3 levels corresponding to
different ranges of water hardness.
Dryness
level
ppm
< 150
150 - 300 C04-C05
> 300
Depending on the country, the water
hardness is expressed in equivalent
scales: e.g. French degrees (°f), German
degrees (°d), English degrees (°e),
mmol/l and ppm
If necessary, please contact your local
water authority to check the water
hardness in your area.
the results
from the inclu‐
ded water
hardness kit.
C01-C03
C06-C07
Every time you enter in the
"Adjustment of remaining
laundry moisture" mode,
previously set degree of
remaining moisture will
change into next value ( e.g
previously set
change into
To change the default degree of
remaining moisture:
1. Press the on/off button to activate the
appliance.
2. Use the program knob to set any
program.
3. Wait approximately 8 seconds.
4. Press and hold buttons (F) and (E) at
the same time.
One of these indicators comes on:
•
maximum dryness
•
more dry laundry
•
standard dry laundry
5. Press and hold buttons (F) and (E)
again until the indicator of the correct
level comes on.
If the display returns to
the normal mode (the
time of the selected
program from step 2. will
be displayed), while
setting the degree of
remaining moisture,
press and hold buttons
(F) and (E) once again to
enter to the "Adjustment
of remaining laundry
moisture" mode
(previously set degree of
remaining moisture will
change into next value).
6. To accept the selected degree of
remaining moisture, wait 5 s and the
display returns to the normal mode.
Dryness level
maximum
dryness
ENGLISH
17
will
).
Display symbol
Advertisement
Table of Contents
