Set-Up Instructions: 3 Liter.& 1 Galon Configurations - Fetco Touchscreen 1.0 CBS-2131XTS Users Manual And Operator Instructions

Change brewer for brew size: CBS-2131 3L; CBS-2131; 1G CBS-2132 3L; CBS-2132 1G
Brewer is factory set for three liter brew capacity. User can configure the brewer for 1 gallon brew
To change brewer configuration: Access the General Service Menu
There are five service menus:
PROGRAM, GENERAL, INPUTS, OUTPUTS, and OTHER (select OTHER in service menu to change to 1 gallon).
Enter Service Menu by accessing the power switch on back of the panel
Service menu is accessed when "PROGRAM" screen (2) displays
1)-Switch power "OFF" with power switch located on rear of brewer
2)-After at least ten seconds: Turn power switch "ON"
3)-Quickly touch and hold the XTS screen to enter the programming screens as shown below (screen1)
4)-When entering The SERVICE MENU: the first screen in the group is "PROGRAM" (screen 2)
5)-Use right and left arrow icons to navigate through the five main SERVICE (2-6 below) menu groups.
6)-Proceed to "OTHER" screen (screen 6). Use down arrow icon, as illustrated, to access second level (6&7).
<
< Batch 1 Right >
XTS
™
EXTRACTOR
TOUCHSCREEN
CBS_2100XTS
<<
Touch
Ready
screen
Heating
Filling to unlock
1
OTHER
< >
< Res to Factory >
< Res to Factory >
^
>>
<< <<
V
7
Use right and left arrow icons to navigate between the five main SERVICE menus. First menu screen Is "PROGRAM"
Highlight programming path and use arrows to locate "Select Model" programming screen
7)-Use right and left arrow icons to navigate to Restore to Factory defaults (Res to Factory) (screen 7).
8)-Use down arrow to set brewer to access factory default settings for the brewer configuration desired (screen 8)
9)-Enter "YES" to restore factory defaults. This will configure the brewer to the correct brew capacity (screen 9)
10) Right and left arrow icons to navigate CBS_2131 3Liter; CBS_2131 1Gallon CBS_2132 3Liter; CBS_2132 1Gallon
Highlight desired brewer type and use the arrow icons to navigate service menu screens.
11)-Press "ENTER" and navigate sing UP arrows to home screen to brew (screens 10&11)
!PLEASE NOTE! ONLY SELECT: CBS_2131 3Liter; CBS_2131 1Gallon CBS_2132 3Liter; CBS_2132 1Gallon . Do not
select any other configuration. Verify the configuration on the home screen (screen 12-marked by arrow)
12)-Home screen
User must setup the brewer before installing. First install legs and adjust for 1 gallon
Go to fetco.com for the latest version of all information
INSTRUCTIONS TO SET BREWER
> < GENERAL >
PROGRAM
< Tank Temp >
EXIT
>>
<<
V
2
<OTHER >
<OTHER >
< Res to Factory >
Res to Default
Res to Default
Are you sure?
. []
YES
^
>>
YES
V
8 9
< INPUTS >
< Display Inputs >
EXIT
EXIT
>>
<<
V V
3 4
<OTHER >
< Res to Factory >
Select Model
CBS_2131 1G
.
NO
^
<<
NO
ENTER
ENTER
10
Part B page 22 P123 partB REV 002 Technical Supplement March, 2016
<OUTPUTS >
< Show Summary
EXIT
>> >>
<<
V
5
SELECT MODEL
CBS_2131 3L; CBS_2131 1G
CBS_2132 3L; CBS_2132 1G
CBS_2141; CBS_2142
CBS_2151; CBS_2152
CBS_2152-2G
CBS_2161; CBS_2162
>> PRESS "ENTER" to save
ENTER
11
< OTHER >a>
> Error Codes
< >
EXIT
>>
<<
V
6
XTS
™
EXTRACTOR
TOUCHSCREEN
CBS_2131 1G
Touch
Ready
screen
Heating
Filling to unlock
12
HIGHLIGHT