Table of Contents
Advertisement
Remote controller switch
monitoring function
This function is available to call the service
monitor mode from the remote controller during a
test run to acquire temperatures of sensors of the
remote controller, indoor unit, and outdoor unit.
Monitor function
Code
00
Return
1
Push the [
] / [
3
"4. Monitor function" on the "Field setting
menu" screen, then push the
"
Set" [
Set
Push the [
] / [
3
the code to check data.
2
Refer to the Installation Manual supplied
with the indoor unit or outdoor unit or
service manual for details about the check
code and data.
3
Push the [
CANCEL] button to return to
the "Field setting menu" screen.
Indoor unit data
CODE
No.
01
Room temperature (remote controller)
02
Indoor unit intake air temperature (TA)
Indoor unit heat exchanger (coil) temperature
03
Indoor unit heat exchanger (coil) temperature
04
Indoor unit fan cumulative operating hours
F3
Outdoor unit data
CODE
No.
Outdoor unit heat exchanger (coil)
60
temperature (TE)
61
Outside air temperature (TO)
62
Compressor discharge temperature (TD)
63
Compressor suction temperature (TS)
64
65
Heatsink temperature (THS)
6A
Operating current (x1/10)
Compressor cumulative operating hours
F1
Data
0024
] button to select
4
F2] button.
] button to select
4
Data name
(TCJ)
(TC)
(x1h)
Data name
—
(x100h)
Adjustment of air direction
1. Using the remote controller switch, change the
up/down air direction by moving the horizontal
louver.
2. Adjust the right/left air direction by bending the
vertical grille inside of the air outlet port with
hands.
REQUIREMENT
Do not touch the horizontal louver directly with
hands; otherwise a trouble may be caused.
For handling of the horizontal louver, refer to
"Owner's Manual" attached to the outdoor unit.
1
Push the [
"1. Wind direction" on the menu screen,
then push the "
button.
2
Push the [
the wind direction.
(1)
(2)
Operation mode
Heat, Fan,
Auto (heating)
Cool, Dry,
Auto (cooling)
3
Push the [
CANCEL] button to return.
The screen returns to the menu screen.
‒ 32 ‒
Installation Manual
Wind direction
Return
Louver
Swing ON
] / [
] button to select
3
4
Set" [
F2]
Set
] / [
] button to select
3
4
(3)
(4)
(5)
Available directions
(1)
(2)
(3)
(4)
(5)
(1)
(2)
(3)
EN
FR
ES
32-EN
Advertisement
Table of Contents
