Stihl FS 80 Instruction Manual page 20

: Place the clamp (5) on the handle
support.
: Insert the screws (6) through the
holes in the parts and screw them
into clamp (3) as far as stop .
: Line up the handlebar.
: Tighten down the screws firmly.
FS 80, FS 80 R, FS 85, FS 85 R
10
9
7
8
Mounting the Control Handle
: Loosen the screw (7) and remove it.
The nut (8) remains in the control
handle (9).
: Push the control handle onto the
handlebar (1) – the throttle trigger
(10) must point toward the
gearhead.
: Line up the holes (11).
: Fit screw in the control handle and
tighten down firmly.
11
1
11
Fitting the Throttle Cable
Do not kink the throttle cable or lay
it in tight radii – make sure the
throttle trigger moves freely.
: Press the throttle cable (12) into the
retainers (13).
Throttle Cable Adjustment
: Go to chapter on "Adjusting the
Throttle Cable".
English
12
13
13
12
13
19