Approved Combinations Of Cutting Tool, Deflector, Handle And Harness - Stihl FS 80 Instruction Manual

English
Approved Combinations of Cutting Tool, Deflector, Handle
and Harness
Cutting tools
1 STIHL Supercut 20-2
2 STIHL Autocut 25-2
3 STIHL Autocut C 25-2
4 STIHL Trimcut 30-2
5 STIHL Polycut 20-3
6 STIHL FixCut 25-2
7 Grass cutting blade 230-2
8 Grass cutting blade 230-4
9 Grass cutting blade 230-8
10 Grass cutting blade 250-40 Spezial
11 Brush knife 250
12 Scratcher tooth circular
saw blade 200
13 Chisel tooth circular
saw blade 200
Grass cutting blades, brush knifes and
circular saw blades made of any other
non-metal material are not permitted.
Deflectors, Limit Stop
14 Deflector for mowing heads only
15 Deflector with
16 Skirt and blade for all mowing heads
(see "Mounting the deflector")
17 Deflector without skirt and blade
for all metal mowing tools
18 Limit stop for circular saw blades
14
Handles
19 Loop handle
20 Loop handle with
21 Barrier bar
22 Bike handle
Harnesses
23 Shoulder strap may be used
24 Shoulder strap must be used
25 Full harness may be used
26 Full harness must be used
Equipment
Among other parts, the complete unit
includes:
– Cutting tool
– Deflector
– Handle
– Harness
Approved combinations
Select correct combination from the
table on the next page on basis of the
cutting tool.
For safety reasons only the tools,
deflectors, handles and harnesses
shown in each row of the table may
be used together.
No other combinations are
permitted because of the risk of
accidents and personal injury.
Mowing heads (1, 2, 3, 4, 5 and 6) may
only be used on bike handle or loop
handle brushcutters.
Grass cutting blades (metal, 7, 8, 9
and 10) may only be used on bike
handle brushcutters or loop handle
brushcutters with barrier bar.
Brush knives (metal; 11) may only be
used on bike handle brushcutters or loop
handle brushcutters with barrier bar.
Circular saw blades (metal; 12 and 13)
may only be used on bike handle
brushcutters.
To reduce the risk of personal
injury, take special care to avoid
contact with the rotating cutting tool.
FS 80, FS 80 R, FS 85, FS 85 R