Table of Contents
Advertisement
10.5.
Program A4 – parameters of individual premises
This subprogram enables to change parameters of a given premises (a logical number is used). The
available parameters are listed in Table 1.
Option
office mode
lock code lock
mute confirmation of the lock
code
feedback blockade
lock opening blockade with
button
alternative lock code event
alternative RFID event
forcing impulse addressing
individual ringtone type
individual ringtone volume
Table 1. Options available for individual premises
After entering subprogram, the cassette will receive one by one the summed up line flags
(message
), ringtone (
alternately with entered values. If the parameter is not entered, only a message is displayed. Going
to the next field is possible after pressing a button
displayed field). In order to clear a given parameter, press the button
it with button
.
Parameters with FLA_ symbol are set as flags. In order to set the appropriate configuration of
these parameters, it is necessary to sum up their weights, which are given in Table 2.
Description
automatic opening the lock when handset is raised
blockade on the use of lock code for this property
mute confirmation of the use of lock code in the
device.
blockade of the use of feedback from the premises
door opening blockade by pressing a button in the
device
property generates code(2) code(3) events
assigned IDs generate an RFID event(1)
this property will be addressed using the old
method (for pc255) despite the new type of
addressing
individually set ringtone type 0-5
individually set ringtone volume 0-7
) and ringtone volume (
25
). Messages are displayed
(it is connected with saving the currently
during display and accept
Symbol
Advertisement
Table of Contents
