Log File Created During Installation - Check Point Pointsec PC Installation Manual

5. Select
6. Click

Log File Created During Installation

While installing Pointsec PC, a log file containing the status of the
installation is written. It is located here (depending on where the
Documents and Settings folder is located):
After that, the following dialog box opens:
, the following dialog box opens:
Finish
to restart your workstation. Once restarted, the installation
Yes
program installs the Pointsec PC system code necessary and verifies
the volumes available. For example:
During every start-up, Pointsec PC runs a suite of self tests to verify
that its integrity has not been compromised.
Once Pointsec PC is completely installed, you will have to authenticate
yourself to access the PC.
Chapter 2
Log File Created During Installation
Installing Pointsec PC for Administrators 33