Check Point Pointsec PC Installation Manual page 18

Table 1-1 General Settings
Setting
ExtendedLogging=
Run=
RunAfter=
12
Description
This setting specifies whether or not log events containing the
status of all user accounts and groups will be written to the
central log file. This setting can be used to reduce the size of
the central log file.
Yes = Write log events containing the status of all user
accounts and groups to the central log file.
No = Do not write log events containing the status of all user
accounts and groups to the central log file.
No is the default.
Here you can enter a program to run before Pointsec PC is
installed.
Here you enter the path to scripts or execs that you want run
immediately after the user logs on to Windows after the
reboot that follows the installation of Pointsec PC. For
example:
• The path to the script required when installing in an IBM
RRU environment.
The path to the dotnetfx.exe to install the .NET
•
Framework if it is not already installed on this machine.
The dotnetfx.exe is found in the Pointsec PC directory:
Pointsec for
PC\1_Pointsec_for_PC\Tools\DotNetRunTime\dotnetfx.exe
Note: Best practice is to specify the path in UNC format:
\\<server>\<share>\....
Review precheck.txt