Registering Pointsec Pc - Check Point Pointsec PC Installation Manual

Registering Pointsec PC

24
To start the Pointsec PC installation on Vista:
1. Log on to Windows Vista as administrator.
2. Insert the Pointsec PC CD into your disk drive and browse to the
autorun.exe file.
3. Right-click on the autorun.exe file and choose Run as administrator. An
User Account Control windows opens and asks for your permission to
install the program.
4. Click Continue to allow the installation to be run with administrator
rights. The License Information dialog box opens and you can continue
with the instructions in the following section,
Pointsec PC", from
Note - In Windows Vista you cannot run the msi package directly from
Pointsec PC CD-rom, you need to browse to the autorun.exe file on the
CD, right-click on the file and choose Run as administrator, see section
"Installing Pointsec PC on Windows Vista" on page
Registering Pointsec PC involves accepting the software license,
confirming that you have backed-up the workstation, and registering your
license number.
To register Pointsec PC:
1. Insert the Pointsec PC CD into your disk drive, the following dialog box
opens:
Note - If you run Windows Vista on your workstation, see the
instructions in the previous section,
Windows Vista", before continuing the installation.
step 3 on page 25 and onward.
"Installing Pointsec PC on
Registering Pointsec PC
"Registering
23.