Window Installation; Door Installation - Tiger TIGERFLEX ZORA Assembly Instructions Manual

Hide thumbs Also See for TIGERFLEX ZORA:

Table of Contents

Step 12:

WINDOW INSTALLATION

• Offer window up to the opening as shown.

• Make sure window is positioned centrally, resting on the last full log within the opening.

Note: There will be a gap either side to allow for settling.

• Secure the window to the walls using 12x 35mm

• Internal fascia's can be installed at this point.

S35

Step 13:

• Offer door up to the opening as shown.

• Make sure door is positioned centrally,

resting on the last tanalised bearers on

the floor within the opening.

If door is on side of cabin, rest door on

the half log.

Note: There will be a gap either side to

allow for settling.

• Secure the door to the walls using

(S35)

12x 35mm

screws.

• Internal fascia's can be installed at this

point.

(Repeat Stage 12)

Note: Doors do not have an internal

lower bottom fascia.

S35

(S35)

screws.

(Repeat Stage 11)

S35

Please retain instructions for future reference

S35

Table of Contents