Advertisement
Quick Links
Advertisement
Related Manuals for Tiger MAYFLOWER SUMMERHOUSE
Summary of Contents for Tiger MAYFLOWER SUMMERHOUSE
- Page 1 TIG/INS56 TIGER MAYFLOWER SUMMERHOUSE GENERAL ASSEMBLY INSTRUCTIONS...
-
Page 2: Before You Get Started
BEFORE YOU GET STARTED PLEASE READ INSTRUCTIONS CAREFULLY • Check the pack and make sure you have all the parts listed. • When you are ready to start, make sure you have the right tools at hand (not supplied). • Ensure there is plenty of space and a clean dry area for assembly. TIMBER As with all natural materials, timber can be affected during various weather conditions. - Page 3 Please retain instructions for future reference CAUTION: CAUTION: All buildings should be erected It is advisable to wear gloves by two competent adults. during building installation. MADE IN THE UK SINCE 1913. We have been making our high quality, great value garden buildings here in Britain for decades.
- Page 4 BEFORE YOU GET STARTED - PRE ASSEMBLY TOOLS REQUIRED: We recommend using the following tools (not supplied): HAMMER RUBBER MALLET LADDER TAPE MEASURE SHARP KNIFE SPIRIT LEVEL SCREWDRIVER + WOOD SAW SPANNER FIXING KIT GUIDES: FX03 - NAIL KITS MEDIUM FX04 - NAIL KITS LARGE For Shed Products With 7ft to 9ft Sides: For Shed Products With 10ft to 13ft Sides:...
- Page 5 Please retain instructions for future reference • Assembly is straightforward if you follow these step-by-step instructions. • We recommend getting everything aligned properly before screwing together and that screw holes should be pre-drilled to avoid splitting the timber. (Do not come pre-drilled). IMPORTANT •...
- Page 6 TIGER MAYFLOWER - GENERAL ASSEMBLY INSTRUCTIONS Step 1: LAYING THE FLOOR • SINGLE FLOOR - Lay floor down in the desired position. (Detail A1) • MULTI FLOOR - 10x8 & 12x8 models. The bearers may run in the opposite direction.
- Page 7 Please retain instructions for future reference Step 2: INSTALLING SIDE AND GABLE PANELS • Position one end gable and side panel as shown. (Detail B1) NOTE: CHECK THAT ALL PANELS ARE AT RIGHT ANGLES TO EACH OTHER AND THE FLOOR. •...
- Page 8 TIGER MAYFLOWER - GENERAL ASSEMBLY INSTRUCTIONS Step 3: SECURING SIDE AND GABLE PANELS • Locate pre-drilled holes in gable panels. (Detail C1) NOTE: THESE MAY HAVE COVERED OVER DURING PANEL COATING PROCESS. THEY MAY RESEMBLE NAIL HEADS. • Use 4x CB80 per gable, through the pre-drilled holes in each gable, from the outside.
- Page 9 Please retain instructions for future reference TOP TIP Use the line of nails securing the floorboards to the bearers as a guide to make sure you correctly secure panels to the floor.
- Page 10 (Certain Sizes Only) • Products with sides 10ft & 12ft are supplied with x2 truss (inc. clips). NOTE: 8x8 MAYFLOWER SUMMERHOUSE NOT SUPPLIED WITH TRUSS. • Carefully remove metal “Z” clips that are attached to the rafter of the roof truss.
- Page 11 Please retain instructions for future reference Step 5: FIT CORNER STRIPS AND COVER STRIPS - CERTAIN SIZES ONLY • Secure the corner strips at each corner of the shed with 4x N40 per corner strip. NOTE: THESE CORNER STRIPS MAY NEED CUTTING TO SIZE. NOTE: NOT TO BE CONFUSED WITH WINDOW BEADING.
- Page 12 TIGER MAYFLOWER - GENERAL ASSEMBLY INSTRUCTIONS Step 6a: 8X8W ROOF INSTALLATION • Fix 1x A & 1x B roof panels together using 3x N65 evenly spaced per section. (Detail F1) • For extra strength, we recommend securing through both sides of the framing of each panel. Repeat for all other roof panels.
- Page 13 Please retain instructions for future reference • For remaining roof panels, push acorn base upward, slightly loosening the roof and catch the new panel edge then lower to “lock in”. For order of panel installation. (Detail F3) (Detail F4) • Secure through acorn base using 2x N65 per joined roof panel. (Detail F5) •...
- Page 14 TIGER MAYFLOWER - GENERAL ASSEMBLY INSTRUCTIONS Step 6b: 10X8W & 12X8W ROOF INSTALLATION • Fix 1x A & 1x B roof panels (AB) together using 3x N65 evenly spaced per section. (Detail G1) • Repeat for one more set of panels. For extra strength, we recommend securing through both sides of the framing of each panel.
- Page 15 Please retain instructions for future reference • Butt 1x roof panel A and 1x roof panel B roof to Panel C (ABC) and secure together using N65 evenly spaced per section. (Detail G4) • Repeat for one more set of panels. •...
- Page 16 TIGER MAYFLOWER - GENERAL ASSEMBLY INSTRUCTIONS Step 7: FELTING THE ROOF - MEASURE AND CUT BEFORE FITTING • Roll felt out onto a clean flat surface 30 minutes before you need it so it has a chance to flatten out.
- Page 17 Please retain instructions for future reference Step 8: FITTING WOODEN RIDGE COVERS AND ACORN(S) • Fit wooden ridge covers as shown. Secure through roof into framing using 6x N40 per ridge. NOTE: THERE ARE NO BARGEBOARDS SUPPLIED FOR LOW SIDE OF ROOF AS THIS WILL PREVENT EFFECTIVE WATER DRAINAGE.
- Page 18 TIGER MAYFLOWER - GENERAL ASSEMBLY INSTRUCTIONS Step 9: INSTALL GLAZING • Glaze windows by securing glass/styrene with PP25 supplied, from the inside. (Detail I) NOTE: ALL WINDOWS MUST BE SEALED INSIDE AND OUT WITH SILICONE, PUTTY, OR ANY OTHER WATER-TIGHT SOLUTION. (NOT SUPPLIED) NOTE: PLEASE DO NOT CONFUSE YOUR CORNER STRIPS WITH WINDOW BEADING.
- Page 19 Please retain instructions for future reference...
- Page 20 TIG/INS56 Display Agent Woodlands DIY Store Station Yard, Horsforth, Leeds, LS18 5NZ Telephone: 0113 205 4189 Website: tigersheds.com Email: customersupport@tigersheds.com...
Need help?
Do you have a question about the MAYFLOWER SUMMERHOUSE and is the answer not in the manual?
Questions and answers