HP Compaq dc7100 DT Technical Reference Manual page 177

A.9 Diskette Drive Error Messages (6xx-xx)
Message
6xx-01
6xx-02
6xx-03
6xx-04
6xx-05
6xx-06
6xx-07
6xx-08
6xx-09
6xx-10
600-xx = Diskette drive ID test
601-xx = Diskette drive format
602-xx = Diskette read test
603-xx = Diskette drive R/W compare test
604-xx = Diskette drive random seek test
605-xx = Diskette drive ID media
606-xx = Diskette drive speed test
607-xx = Diskette drive wrap test
608-xx = Diskette drive write-protect test
Technical Reference Guide
Diskette Drive Error Messages
Probable Cause
Exceeded maximum soft error limit
Exceeded maximum hard error
limit
Previously exceeded max soft limit
Previously exceeded max hard limit 6xx-23
Failed to reset controller
Fatal error while reading
Fatal error while writing
Failed compare of R/W buffers
Failed to format a tract
Failed sector wrap test
Table A-8.
Message Probable Cause
6xx-20 Failed to get drive type
6xx-21 Failed to get change line status
6xx-22 Failed to clear change line status
Failed to set drive type in ID media
6xx-24 Failed to read diskette media
6xx-25 Failed to verify diskette media
6xx-26 Failed to read media in speed test
6xx-27 Failed speed limits
6xx-28 Failed write-protect test
-- --
609-xx = Diskette drive reset controller test
610-xx = Diskette drive change line test
611-xx = Pri. diskette drive port addr. conflict
612-xx = Sec. diskette drive port addr. conflict
694-00 = Pin 34 not cut on 360-KB drive
697-00 = Diskette type error
698-00 = Drive speed not within limits
699-00 = Drive/media ID error (run Setup)
361834-002
Error Messages and Codes
A-9