Samsung WA24A8370G Series User Manual page 14

Installation
D
14 English
Untitled-1 14
6. While holding down part (D), connect the water hose
to the adaptor. Then, release part (D). The hose fits
into the adaptor with a clicking sound.
7. Connect the other end of the water hose to the inlet
valve on the back of the washing machine. Turn the
hose clockwise to tighten.
8. Open the water tap and check if there are any leaks
around the connection areas.
- If there are water leaks, repeat the steps above.
• If using a screw type of water tap, connect the water
hose to the water tap as shown.
2021-06-09 11:33:17