Samsung R710 Service Manual page 30

- This Document can not be used without Samsung's authorization -
2. Introduction and Specification
Internal
Advanced
Core Multi-Processing
▷ The option to determine whether to switch Single core or Dual Core processing.
Intel(R) SpeedStep(TM)
▷ The option to enable or disable the SpeedStep function that automatically changes the CPU clock
speed according to CPU usage. Enabling this function extends the battery use time.
Touch Pad Mouse
▷ The option to enable or disable the touch pad function. If the touch pad function is disabled using
this option, the disabled status will be retained at the next boot time. For your information, if the
touch pad function is disabled by pressing Fn+F9, the touch pad function is enabled at the next boot
time.
Legacy USB Support
▷ The option to determine whether to support a Legacy USB device. If this option is set to Enabled,
you can boot from a USB device.
Large Disk Access Mode
▷ Currently, [DOS] should be set in Geneva. Setting this option is rarely needed.
EDB (Execute Disable Bit)
▷ If [enable], Intel Execute Enable Bit(function) will be enabled.
Internal LAN
2 - 24