Samsung R710 Service Manual page 130

- This document cannot be used without the authorization of Samsung -
3. Disassembly and Reassembly
Part
Name
LCD
Ass'y
Figure
1. 1st, Remove 6 Rubbers
2nd, Remove 6 screws.
- M2xL6 : 6 EA (Upper side, WHT)
* CAUTION :
Be careful with scratch in LCD-Front when
removing Rubber-Front.
2. Separate lower side of LCD Front Putting in
hands between LCD Panel and LCD Front.
3. Separate left and right side with the same
way.
4. Separate upper side with the same way.
*CAUTION
Don't get in too much force with
disassembling LCD Front.
5. Remove 2 screws.
- M2xL6 : 2 EA (RED)
6. Separate LCD Cable and inverter b'd
connector like pic.
3-9
Description