Table of Contents
Advertisement
Electrical connection
Damage through improper work.
Installation, repair, and maintenance
work performed by by unqualified
persons can cause considerable
danger to users.
Miele cannot be held liable for any
damage arising as a result of such
work.
Installation, repair and maintenance
work should only be performed by a
Miele-authorized qualified electrician
in compliance with local regulations
and the ANSI National Electrical
Code/NFPA 70 in the United States
or the Canadian Electric Code, CSA
C22.1-02. in Canada.
Danger of electric shock.
There is a risk of electric shock when
performing installation, repair, and
service work .
Before performing installation, repair,
and service work, disconnect the
power supply by either removing the
fuse, shutting off the main power or
manually "tripping" the circuit
breaker.
Danger of electric shock by
missing or interrupted grounding.
The appliance may be energized.
To guarantee the electrical safety of
this appliance, continuity must exist
between the appliance and an effec-
tive grounding system. It is impera-
tive that this basic safety require-
ment be met. If there is any doubt,
have the electrical system of the
house checked by a qualified electri-
cian.
Damage by incorrect connection.
If the household electrical supply is
not suitrable for the appliance, it can
be damaged.
The voltage and frequency listed on
the data plate must correspond with
the household electrical supply to
prevent damage to the appliance.
Ensure that the connection data on
the data plate match those of your
electrical supply. Consult an electri-
cian if in doubt.
For safety reasons, the cooktop may
only be used when it has been fully
installed into the countertop.
Important – Save these instructions
for the local electrical inspector's use.
Installation
47
Advertisement
Table of Contents
