Setting The Clock - Honeywell Home RTH2410B1019/E1 Operating Manual

Programmable
Table of Contents

Advertisement

Available languages

Available languages

Operating Manual
Set the clock
Press the Set button. Set Time will appear on the screen and
the time display will flash.
Press the Up or Down button to set the time.
Press the Set button again. Set Day will flash on the screen.
Press the Up or Down button to select the day of the week.
Press the Run button to save the changes & exit. (The
changes are also saved if you do not press any button for 60
seconds.)
NOTE: The clock has lost its settings when the time display flashes. If the thermostat is
following the schedule, it will use the temperature settings programmed for the Wake
period for Monday until you readjust the clock.
69-2420ES—03
6
M38897

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Rth2410Rth2510

Table of Contents