HP Brio 8200 Online Manual page 53

8 Slide the system board drawer back into the computer chassis. Check that the front bezel fan connector is still
connected to the system board. If not, reconnect it.
9 Install any other accessories before returning the computer to the upright position, replacing the cover and
reconnecting the power cords and any telecommunications cables. Turn on the display and computer.
10 If you have just installed a Plug and Play expansion card, Windows is able to recognize and configure the card
automatically. The New Hardware Found dialog box is displayed while Windows loads the necessary driver(s).
If Windows does not find the correct driver, it displays the following choices for you to select:
•
Windows default driver. (Shaded if the card is not known by Windows.) If this option is available, select it.
•
Driver from disk provided by the manufacturer. If a Windows default driver is not available, and you have a
driver disk, select this option. You then need to insert the disk and click the OK button.
•
Do not install a driver. Windows will not prompt you again. In this case, the card will be installed but it will
not work.
•
Select from a list of alternative drivers
System Board
3 Upgrading and Adding Accessories
Adding Accessories
Front Bezel
Fan Connector
Processor
System Board
53