HP Brio 8200 Online Manual page 48

Completing the
1 Install any other accessories before returning the computer to the upright position, replacing the cover, and
reconnecting the power cords and any telecommunications cables.
Installation
2 Turn on the display and computer. The computer should recognize the new processor.
Troubleshooting
If the new processor is not recognized, the startup routine will stop shortly after you turn on the computer. If this
happens, turn off the computer and check that you have correctly installed the processor.
If the new processor is still not recognized, remove it and put the old processor back into the computer (remember to
reset any jumpers if necessary), and then restart the computer. If the computer now starts without any problems, there
may be a problem with the new processor.
If you experience any other problems as a result of the upgrade, and your computer is supplied with the HP Brio Center,
refer to the support tools for further assistance.
3 Upgrading and Adding Accessories
Upgrading Hardware
48