HP Brio 8200 Online Manual page 51

Installing an Expansion Card
Static electricity can damage electronic components. Turn off all equipment. Don't let your clothes touch the
Caution
accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing
the accessory from the bag. Handle the accessory as little as possible and with care.
1 Remove the computer's cover (refer to
2 On a table top turn the computer on to its side, with the system board closest to the surface of the table top.
3 Slide the system board drawer out of the computer chassis as far as the cables connected to the system board permit.
4 Find a free expansion card slot with the correct type of connector
page 49). Some cards may have preferred locations, in which case special installation instructions should be detailed
in their manuals.
"Removing the Cover" on page
3 Upgrading and Adding Accessories
37).
(PCI or ISA, refer to "Adding Expansion Cards" on
Adding Accessories
51