Speakers And Sound; Internet Access - HP 310-1125 Getting Started

Speakers and sound

Symptom Possible solution
Volume is very Ensure that you connected the speakers to the Audio Out connector on the back of the
low or computer. (Additional audio connectors are used for multiple-channel speakers.) Detached non-
unsatisfactory. powered speakers (speakers without a separate power source, such as batteries or a power
cord) do not produce satisfactory sound. Replace the non-powered speakers with powered
speakers.
No sound is For Windows 7:
produced.
1.
2.
If you are using built-in computer speakers, use the Volume button to adjust volume. You can
also use My Display TSE to ensure that the volume is set appropriately.
Ensure that you connected powered (active) speakers and that they are turned on.
Turn off your computer, and then unplug and reconnect the speakers. Ensure that the speakers
are connected to an audio connector, not a Line In or headphone connector.
To resume from Sleep mode, press the Sleep button (select models only), or press Esc.
Unplug headphones if they are connected to your computer (or speaker system).
When external When an Audio Line Out connector (such as headphones or external speakers) is connected,
speakers are the internal speakers are muted.
connected, the
audio is muted.

Internet access

Symptom Possible solution
Internet programs Log in to your Internet Service Provider (ISP), and start the desired program.
do not start
automatically.
Tap the Start button, tap Control Panel, tap Action Center, and then tap
Troubleshooting.
Under Hardware and Sound, tap Troubleshoot and audio playback.
Speakers and sound
17