Table of Contents
Advertisement
11
Cleaning and Maintenance
Power cord
Removing and attaching the inner lid
„ Removing the inner lid
Inner lid button
Lift the inner lid button and
pull the inner lid toward you.
(2) Remove it.
„ Attaching the inner lid
Securely insert the left and right
tabs of the inner lid into the groove.
Tab
Groove
Note
● Do not pull on the lid gasket or inner lid gasket. It cannot
be reattached once it is removed.
When the lid gasket or the inner lid gasket comes
off, contact the place of purchase.
Inner lid gasket
Inner lid
32
32
32
Wipe it using a dry cloth.
Note
● Do not immerse the power cord in or splash it with
water. Doing so may cause short circuits, electric
shock, or malfunction.
(1) Lift the inner lid.
(1) Insert the tabs.
(2) Push in the lid until it clicks.
Lid
Lid gasket
Do not remove the gasket.
Do not forcefully push or pull
the gasket. Doing so may
allow steam to leak, resulting
in malfunction.
Removing and attaching the steam cap
„ Removing the steam cap
(1) Insert your fingers into the indentation in
the lid and lift and remove the steam cap.
Steam cap
Note
● Be careful when removing the steam cap
immediately after cooking, as hot condensation is
collected in it.
(2) Rotate the cap unit counterclockwise
to align the marking on the cap with the
unlock symbol
.
The unlock symbol is marked on the cap lid.
Unlock symbol
Cap lid
Cap unit
Turn the cap unit
until it stops.
Marking
„ Attaching the steam cap
(1) Align the protrusions of the cap unit with the
indentations of the cap lid as shown in the
figure and fit the cap unit into the cap lid.
There are three indentations and protrusions each.
(3) Lift and remove the cap unit from the cap lid.
Note
● Do not remove the gasket or O-ring from the cap
unit. Securely reattach the gasket or O-ring if it
comes off. Make sure that the direction of the
gasket on the cap unit is correct.
Wet the O-ring if it is difficult to attach it.
● Be sure to set the gaskets, etc. before using the rice
cooker. Failure to do so may allow steam to leak out
and prevent the food from cooking properly.
Gasket
Cap unit
Cap lid
O-ring
(2) Rotate the cap unit clockwise and align the
marking on the cap unit with the lock symbol.
The lock symbol is marked on the cap lid.
Turn the cap unit
until it stops.
Marking
Lock symbol
(3) Securely attach it to the rice cooker.
33
33
33
Advertisement
Table of Contents
