Page 3
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document.
Page 4
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION This 4K UHD HDMI over CAT Transmitter and Reciever Set is designed for high-quality AV extension with minimum latency. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K@60Hz (4:4:4) HDMI audio/video streams. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit colour and multi-channel HD Bitstream audio can be easily transmitted.
5. FEATURES HDMI 2.0 and DVI 1.0 compatible HDCP 2.2 and HDCP 1.x compliant 1 HDMI input 1 10GbE output Ultra-light compression, lossless for most content Extension up to 100m when using at.6A/7 Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input and output Supports pass-through of 10/12-bit HDR sources...
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Transmitter Front Panel HDMI IN VIDEO CAT6A/7 Power ( ) LED: This LED will illuminate to indicate the unit is on and receiving power. Note: This LED will blink during the firmware update process. System ( ) LED: This LED will illuminate to indicate that the system is stable and ready to process audio/video streams.
6.2 Transmitter Rear Panel SERVICE DC 5V SERVICE DC 5V SERVICE (USB Mini-B) Port: This port is for firmware update only. DC 5V Port: Plug the 5V DC power adapter into this port and connect it to an AC wall outlet for power.
6.3 Receiver Front Panel HDMI OUT VIDEO CAT6A/7 Power ( ) LED: This LED will illuminate to indicate the unit is on and receiving power. Note: This LED will blink during the firmware update process. System ( ) LED: This LED will illuminate to indicate that the system is stable and ready to process audio/video streams.
7. CONNECTION DIAGRAM Power Supply SERVICE DC 5V HDMI IN CAT6A/7 VIDEO Media Player HDMI Input HDMI Output HDMI OUT Smart TV VIDEO CAT6A/7 Power Supply SERVICE DC 5V...
Need help?
Do you have a question about the AVX-101C-KIT and is the answer not in the manual?
Questions and answers