Page 1
VEX-E4501T & VEX-E4501R HDMI over HDBaseT Transmitter & Receiver with USB KVM Operation Manual Operation Manual...
Page 3
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
Page 4
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION This 4K UHD HDMI over HDBaseT transmitter and receiver pair uses HDBaseT 3.0, the newest generation of HDBaseT technology, and is the perfect solution for extending full bandwidth (18Gbps) HDMI 2.0, 4K@60Hz (4:4:4, 8-bit) video with HD audio via a single run of Cat.6A/7 cable over distances of up to 100 meters.
4. SYSTEM REQUIREMENTS • HDMI source equipment such a media player, video game console, or set-top box. • HDMI receiving equipment such as an HDTV, monitor, or audio amplifier. • The use of Premium High Speed HDMI cables, and industry standard Cat.6A or Cat.7 Ethernet cable is highly recommended.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel (Transmitter) AUDIO BYPASS R PWR EXTRACT LINK AUDIO LAN Port: Connect to Ethernet supporting devices or to your local network, as appropriate, to extend the network to both ends of the HDBaseT connection. AUDIO IN 3-pin Terminal Block: Connect to the analog audio output of a device such as a media player or game console using a 3-pin adapter cable.
BYPASS & EXTRACT LEDs: These LEDs will illuminate to indicate if the unit is in audio bypass or extract mode. POWER LED: This LED will illuminate to indicate the unit is on and receiving power. LINK LED: This LED will illuminate solidly when a live connection with a compatible receiver is active.
6.3 Front Panel (Receiver) AUDIO BYPASS R PWR EXTRACT LINK AUDIO LAN Port: Connect to Ethernet supporting devices or to your local network, as appropriate, to extend the network to both ends of the HDBaseT connection. AUDIO IN 3-pin Terminal Block: Connect to the analog audio output of a device such as a media player or game console using a 3-pin adapter cable.
POWER LED: This LED will illuminate to indicate the unit is on and receiving power. LINK LED: This LED will illuminate solidly when a live connection with a compatible receiver is active. 6.4 Rear Panel (Receiver) CAT6A/7 IN HDMI IN HDMI OUT USB 2.0 Port (Micro-B): Connect directly to a standard USB host such as a PC or laptop to extend their USB functionality to all currently...
7. CONNECTION DIAGRAM Router Tower PC Local Monitor 60° 1.5m 60° RS-232 IR Input & Output HDMI HDMI Input Output AUDIO BYPASS Power R PWR EXTRACT LINK AUDIO Supply DC24V 2.7A CAT6A/7 OUT HDMI IN HDMI OUT IR Input & AUDIO BYPASS Output R PWR...
8.6 HDBaseT Features HDBaseT Feature Set Transmitter Video & Audio Extension Supported LAN Extension Supported Send power to Receiver Supported (PoH) Accept power from Receiver Unsupported IR Extension Supported RS-232 Extension Supported USB 2.0 Extension Supported HDBaseT Feature Set Receiver Video &...
Need help?
Do you have a question about the VEX-E4501T and is the answer not in the manual?
Questions and answers