Elo TouchSystems Wallaby KIT-EMV-VF-MX915-ING-ISC250-SQ-4 Assembly Instructions Manual page 6

7
Cover Plate
For Square Terminal, skip to step 7.
Remove and discard EMV Cover Plate and M4 screws.
Remove and save Base Plate and M3 screws.
8
Base Plate
From Bag "Q"
Attach Square Terminal using (1) screw from bag "Q",
threading screw into hole on bottom of Square Terminal.
Assemble (3) screws from bag "H" as shown to prevent
Square Terminal from rotating. Tighten each screw until
resistance is felt.
From Bag "H"
© Copyright 2021 Elo Touch Solutions, Inc.
6