Elo TouchSystems Wallaby KIT-EMV-VF-MX915-ING-ISC250-SQ-4 Assembly Instructions Manual page 4

3
Add (2) screws to EMV Mount Plate from bag "P"
at position 1, 2,3 or 4. Leave ~3mm (1/8") gap (for
EMV Arm).
Position "1" for 15" in portrait.
Position "2" for 22" in portrait.
Position "3" for 15" in landscape.
Position "4" for 22" in landscape.
1
2 3
4
4
Assemble EMV Arm to Display Bracket. Add
(2) screws from bag "P" at right most
position "A" to secure EMV Arm to Display
Bracket.
A
© Copyright 2021 Elo Touch Solutions, Inc.
4