Elo TouchSystems Wallaby KIT-EMV-VF-MX915-ING-ISC250-SQ-4 Assembly Instructions Manual page 5

5
Cover Plate
For Square Terminal, skip to step 7.
Remove and save EMV Cover Plate and screws.
Add (3) screws for mounting EMV terminal:
- Use bag "G" and holes labeled "1" for
- Use bag "H" and holes labeled "2" for
- Use bag "H" and holes labeled "3" for
Attach EMV terminal cable to terminal and slide terminal
onto (3) Arm Assembly screws.
6
Ingenico iSC250
Verifone MX915
Verifone M400
Attach EMV Cover Plate
and screws.
Route EMV terminal
cable and tie-wrap.
11
Skip to step
© Copyright 2021 Elo Touch Solutions, Inc.
5