ZyXEL Communications PLA5000 Series User Manual page 38

Figure 25 Add New Adapters to Make a Second Network
Connect your new Powerline adapter and open the configuration utility as shown in
1
page 39. The screen shown below appears.
Type a Network Name that is different from the Network Name for your existing network. Make sure you
2
use the same new Network Name for all new adapters you want to add to your new network.
Figure 26 Making a New Network with the New Adapter
After you have set up a new network, you are ready to connect each Powerline adapter on your new
3
network to devices, for example, a computer or a games console.
Chapter 5 Powerline Network Setup Tutorial
PLA Series User's Guide
40
Section 5.5 on