ZyXEL Communications PLA5000 Series User Manual page 36

Figure 21 Add a Printer to Your Powerline Network
Note: You do not need to know the network name of the new adapter to add it to your
network.
Connect your computer to the Powerline adapter you want to add to your network and open the Zyxel
1
PLA Series Configuration utility (see
Go to the Configuration screen. On this screen in the Site column your new Powerline adapter should
2
appear as Local (A). Check the Local adapter's MAC address (B). It should match the MAC address
listed on the label on the back of your Powerline adapter.
Figure 22 Adding a New Adapter
A
Select your adapter by selecting Local and type the network name for your existing network in the
3
Network Name field (C).
Chapter 5 Powerline Network Setup Tutorial
Section 5.3 on page
B
PLA Series User's Guide
38
37).