Reset; Feedback Information; Service; Preventive Maintenance - Robert Juliat ROXIE Manual

5.1.4 Reset

• Reset to default settings:
Menu: Fixture Reset → press Select → Yes & press Select to validate

5.1.5 Feedback information

• DMX and system LED feedback (see display & controls 7 , Cf. EN-15):
⇒ Green= DMX512 frame detected
⇒ Red = Problem on DMX512 frame and/or system default – details available in the fixture status
• If DMX512 data lost, the following message is displayed:
The last received DMX values are stored but it is possible to inactivate the current values
by pressing the Select key (as well as the Master function) in order to get a total control of
the fixture locally. When a DMX signal is detected, the DMX control is active again.
• ¥ signal indicates a wireless DMX:
Switched off – no symbol
Slow intermittent display
Continuous display
Rapid intermittent display

6 Service

6.1 Preventive maintenance

6.1.1 Frequency

General maintenance should be performed at least once a year or more frequently if
the equipment is operated in adverse conditions (smoke, heat, humidity, touring, etc.).

6.1.2 General cleaning

Remove dust from the unit (air vents, printed circuit boards, etc.).
During cleaning:
• • LED is protected by a safety glass to avoid any contact.
• • Fan blades must be locked.

6.1.3 General visual check

• No trace of heat.
• No loose contacts.
• No missing parts.
• Tighten mechanical assemblies (screws, bolts and nuts, ground connections, etc.).

6.1.4 LED source

• Do not touch the surface of the LED source
• Do not put compressed air directly on the source.
• Contact a certified RJ distributor in case of residuals or other objects located on
"Push select to reset DMX values"
Signal
DO NOT spray directly onto the glass.
(no contact with your hands or any tools).
the surface of the LED source.
The fixture is not paired with a transmitter
The fixture is paired with a transmitter but the DMX signal is not
detected
The fixture is paired with a transmitter and the DMX signal is
detected
Lost connection with the transmitter or in connection with the
transmitter
EN - 16 -
Information
EN