Table of Contents
Advertisement
The Setup Wizard (continued)
If your ISP uses
PPPoE
Point Protocol over Ethernet), and
this option is selected, then this
screen will appear: (Used mainly for
DSL Internet service.)
Please be sure to remove any
existing PPPoE client software
installed on your computers.
Enter in the username and password
provided to you by your ISP.
Click
Next
802.11g Wireless Setup
The default wireless settings
for your 802.11g wireless
network are:
SSID = default
Channel = 6
You can change these settings
to match an existing wireless
network.
Click
Next
If you wish to use encryption for
your 802.11g network, the DI-774 is
capable of three levels of wireless
encryption: 64-bit, 128-bit, and 152-
bit. By default the encryption is
disabled. You can change the
encryption settings for more secure
wireless communication.
Click
Next
(Point-to-
7
Advertisement
Table of Contents
