Table of Contents
Advertisement
Connecting The DI-774 Wireless Router To
Your Network
A.
First, connect the power adapter to the receptor at the back panel of the
DI-774 and then plug the other end of the power adapter to a wall outlet or power
strip. The Power LED lights up indicating proper operation.
B.
1. Power off your Cable or DSL modem; the devices that do not have a on/off
switch and will require you to unplug the power adapter. Now, the DI-774 should be
powered on and the Cable / DSL modem should be turned off. Cable / DSL
modem
(Power
2.Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL
modem. After the Ethernet cable is securely connected, power on the Cable / DSL
modem by turning on the unit or plugging in the power adapter. Cable / DSL
modem
(Power
3. Insert the other end of the Ethernet cable to the WAN PORT on the back panel
of the DI-774. The WAN LED light will illuminate to indicate proper connection. If
the WAN LED is not illuminated, please go back to step B1 and repeat the steps.
C.
Insert an Ethernet cable to
available Ethernet port on the network adapter in the computer you are using to
configure the DI-774. The LED light for LAN Port 1 illuminates to indicate proper
connection. (Note: The LAN Ports on the DI-774 are Auto-MDI/MDIX. Meaning
you can use a straight-through or crossover-Ethernet cable in the LAN Ports.)
Computers equipped with D-Link 802.11a/b/g wireless adapters will be able to
D.
connect out of the box with the DI-774 using their default wireless settings.
D.
Antenna
Used to
wirelessly
connect to
802.11a/b/g
adapters.
Reset Button
Pressing this button restores the Router to
its original factory default settings.
Off) – DI-774
(Power
On) – DI-774
(Power
LAN Port 1 on the back panel of the
C.
LAN PORTS
are the connections
for Ethernet cables to
Ethernet enabled
computers.
On)
On)
These
B.
This is for the connection
of an Ethernet cable to the
Cable or DSL modem
2
DI-774 and an
WAN PORT
A.
Receptor for
Power
Adapter.
Advertisement
Table of Contents
