Table of Contents
Advertisement
CARE AND CLEANING
Step 3
Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4
Install the shelf supports in the
opposite sequence.
11.3 How to use: Catalytic fan cover
The fan cover is coated with a catalytic enamel. It absorbs fat which collects on the walls while
the oven works. To support the self-cleaning procedure, heat the empty oven on a regular
basis.
Spots or discolouration of the catalytic coating have no effect on the cleaning.
Turn off the oven and wait
until it is cold.
Step 1
Turn on the oven.
Set the function: Cleaning in
the menu: Cleaning.
11.4 How to remove and install: Door
You can remove the door and the internal glass panels to clean it. The number of glass panels
is different for different models.
WARNING!
The door is heavy.
CAUTION!
Carefully handle the glass, especially around the edges of the front panel. The glass can
break.
34/52
Before the catalytic cleaning
Remove all accessories and
removable shelf supports.
Clean the oven with catalytic cleaning
Step 2
When the cleaning ends the
signal sounds. The oven turns
off.
1
2
Clean the oven floor and the
inner door glass with warm
water, soft cloth and mild de‐
tergent.
When the oven is cold,
clean the cavity with a wet
soft cloth.
Step 3
Advertisement
Table of Contents
