Table of Contents
Advertisement
HCS-2810 / 3810
Sharpening
Level 2.
If a power grinder is used DO NOT allow blade to over heat.
1.
Move stop switch to STOP
position.
2.
Disconnect spark plug wire.
3.
Remove blade guard.
4.
Slide blades to allow file
clearance using slots (A) on
bottom of blade. Do not pry
against cutting edges.
5.
File each edge carefully. Follow
the original shape of the blade.
6.
Install blade guard.
Use new lock nuts each time blade guard is installed. See dealer for
correct nuts.
7.
Lubricate blades (see "Lubrication").
8.
Connect spark plug wire.
X7702248300
© 09/19 ECHO Incorporated
MAINTENANCE
A
35
Advertisement
Table of Contents
