Table of Contents
Advertisement
MAINTENANCE
5.
Assemble components in reverse order.
Exhaust System
Spark Arrestor Screen
Level 2.
Parts Required:
1.
Remove spark plug lead.
2.
Remove muffler cover (B).
3.
Place piston at Top Dead Center (TDC) to prevent carbon/dirt from
entering cylinder.
4.
Remove exhaust guide (C),
gasket (D), and screen (E)
from muffler body.
5.
Clean carbon deposits from
muffler components.
Note: When cleaning carbon
deposits, be careful
not to damage the
catalytic element
inside muffler.
6.
Replace screen if it is
cracked, plugged, or has
holes burned through.
7.
Assemble components in
reverse order.
Exhaust Port Cleaning
Level 2.
Parts Required:
30
Spark Arrestor Screen, Gasket
As needed: Heat Shield
HCS-2810 / 3810
B
E
D
C
© 09/19 ECHO Incorporated
X7702248300
Advertisement
Table of Contents
