Echo X Series Operator's Manual page 22

OPERATION
1. Stop Switch
Move stop switch (A) away from
the STOP position.
2. Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
3. Recoil Starter
Place the unit on a flat, clear
area. Grip the support handle
(D) securely with right hand,
and pull the recoil starter handle
(E) with left hand until engine
fires.
Note: If engine does not start
after 5 pulls, use Cold
Start Procedure.
22
HCS-2810 / 3810
A
C C
B
E
X7702248300
© 09/19 ECHO Incorporated
D