Troubleshooting
The ribbon is caught in the printer
1
Pull out the ribbon�
2
Cut the ribbon�
3
Remove the ribbon that remains in the
printer unit carefully�
4
Reattach the ribbon with tape or similar
material�
5
Rotate the take-up roller until the part
attached with tape cannot be seen anymore�
6
Insert the ribbon cassette in the printer unit�
7
After switching the ON/Standby switch on the printer unit to ON, set the paper again�
When the mechanism unit is closed, initialization of the paper will be performed (any
matter printed in case of error will be ejected)�Until initialization is performed, errors cannot
be removed�
Any pieces of ribbon left inside
the printer may affect the print
quality� In such cases, clean the
platen roller�
(see "Platen roller" P�26)�
Fix with tape�
Take-up side
Do not let a slack form
when taking up the
ribbon�
- 24 -
Supply side