Connecting The Power Cord And A Computer - FujiFilm ASK-400 User Manual

Connecting the power cord and a computer

1
Make sure that the ON/Standby switch of the
printer unit is set to Standby�
2
Make sure that the power switch of the
computer is set to OFF�
3
Plug the connector of the power cord
(supplied) into the printer power inlet�
4
Plug the power cord into an outlet�
5
Connect the printer and the computer with a
USB cable�
6
Set the ON/Standby switch of the printer unit
and the power switch of the computer to ON�
Caution
• Use the power cable supplied with the printer, and be sure to connect the ground wire�
• Use a shielded USB cable compatible with the USB 2�0 specifications� Otherwise
unexpected troubles may arise�
- 13 -
Printer Installation
Standby
ON/Standby
switch
Power inlet
USB port